WEDDING TECHNIQUES | OFF CAMERA FLASH WEDDING DISCO PHOTOGRAPHY

camera flash Disco Wedding photography at Colwick Hal

Sometimes I like to change up my wedding disco photography - I normally shoot the disco part of weddings with a single handheld flash, zone focused to around 2 meters I then get close and start shooting!

But sometimes, depending on the venue, or the type of wedding, I like to rig up a couple of Profoto A1's on light stands and get some directional lighting going on.  It can be a little more hit-and-miss because you can only shoot in certain directions unless you want the lights flaring into the lens.

In the shot above, you can see the light I have rigged to the left has lit one of the 'ravers' perfectly, and the light to the right has added a kick to the back of the bride and a few of the other 'groovers'. The trick with this type of set-up is to wait until the 'partygoers' are in the zones of the off-camera flash and then fire away.

In the above shot, I am still shooting with the same 'cross lighting' but using the light over my shoulder to light her up, making sure that I am not getting the light on the right-hand side in the shot.

The settings for this type of off-camera flash does vary depending on the venue, the ambient lights and sometimes the guests. I normally have a flash set to the side of the band or DJ with the other flash directly opposite, so they are facing each other.


Off Camera Wedding Disco Photography

For the camera settings, I tend to want the only light in my camera to come from the flash so I set my camera to eliminate all ambient light. The above image was shot 1/100th of a second, F5 and ISO 160. These settings mean that I get enough depth of field, the ISO is nice and low so perfectly clean and the shutter speed was set to ensure I didn't get any light streaks from the disco lights.

The flash power is trial and error to start with, but after a few frames, it's easy to dial in the correct power - I always start at 32nd power, which means I can increase or decrease the power of the flash, all of which is done using the Sony Profoto trigger.

I shoot for around 30 minutes with this set-up and often at the start of the disco / live music because the dance floor is not busy. The main problem with this off-camera setup is people blocking the flash. If the dance floor is really busy, then it's difficult to get clean flash on people, and you can end up with very heavy shadows, often partial shadows - these images can still work, but the busier the dance floor the more difficult it becomes.

When the dance floor becomes too busy, I switch to my other wedding disco photography setup, zone focus and the flash on camera.

Hopefully, this gives you an idea of how you can improve or add something to your wedding disco photography

Off Camera Wedding Disco Photography

Previous
Previous

SHOWCASE | THE MOMENT AFTER THE FIRST DANCE

Next
Next

THE BESTWOOD LODGE HOTEL WEDDING PHOTOGRAPHY